RUSSIAN SPANISH ENGLISH

 

Materials Handling

One of the most common uses for which MoistScan® online moisture analyser is purchased is to reduce problems associated with the conveyance and processing of bulk materials.  Typically problems arise when water is added to materials, particularly materials that are high in fine particles.   Minerals that have significant clay content are cases in point.   Here particles tend to agglomerate with the addition of water resulting and become sticky.   This causes problems particularly at transfer points and in chutes and hoppers where hold up or clog ups occur.  By better monitoring and controlling the addition of water non-productive equipment down-time can be reduced substantially.

Click here to talk to us about how MoistScan® can be used to overcome problems of hold up and clogging of chutes and hoppers.


 

Application examples:

 

Food Manufacturer Vic,  Australia


Instrument:
Material:
Installation:


Moisture:
 
Purpose:


MA-600SF (2 units)
Corn Starch (for sugar candy moulding)

Analysers installed to screw conveyors, returning freshly conditioned starch to the process and feeding blended starch to the moguls.
5 - 7
% moisture (freshly conditioned starch)
7 - 9% moisture (blended starch)
Online moisture analysis and control of blending and conditioning.

 

Alumina Refinery – Qld, Australia


Instrument:
Material:
Installation:
Bed Depth:
Moisture:
Purpose:


MA-500 Series with temperature sensors
Alumina Hydrate

On conveyor
80mm - 450mm
6 - 10%
To help manage the filters (Dewatering system) to ensure the moisture content of the Alumina Hydrate being fed to the calciners does not exceed set points.

No image available

 

 

 

Home  | About Us | Products | Services |  Industries | Uses | Technical Information | News | Downloads | Contact | Site Map | Moistscan